How to Use Me Encoder Motor Tuning Tool

by | 2016-03-07

After you install the encoder motors to your robots, you may need to tuning the PID parameters and other parameters. The tuning tool can be downloaded here. Connect the driver module and PC with a USB-to-UART adapter, then choose the right serial port at the...

Mecanum Wheel Robot Kit

by | 2016-03-07

Mecanum Wheel Robot Kit is a type of mobile chassis robot based on Makeblock open source hardware. The chassis of this kit consists of mecanum wheel, encoder motor driver, mechanical structure and other electronic modules (e.g. main controller). This robot kit is for...

API Documentation of Me Encoder Motor

by | 2016-03-07

MeEncoderMotor(uint8_t addr,uint8_t slot); Description: Constructor of Encoder Motor. Parameters: uint8_t addr: I2C address of driver module uint8_t slot: the motor number, can be SLOT1 or SLOT2. Example: MeEncoderMotor motor1(0x09, SLOT1); MeEncoderMotor motor2(0x09,...

Introduction to Programming——mBlockly for Codeybot

by | 2016-03-04

    Control your robot and learn programming by snapping graphical building blocks together. A Codeybot educational robot is required for running this app! LET YOUR ROBOT FEEL, THINK, AND DANCE With mBlockly, you can build short programs to let your Codeybot...

mBot-FAQ

by | 2016-03-03

 Introduction Get Started Programming Resource Download FAQ Contact information Technical support:  support@makeblock.com mBot motor shaft broken This video will teach you how to replace the broken motor shaft for your mBot within 1-2-3 steps:...