Description
MG995 servo is a simple, commonly used standard servo for your mechanical needs such as robotic head, robotic arm. It comes with a stardard 3-pin power and control cable for easy using and metal gears for high torque. A Me RJ25 Adapter also help you to connect the servo with Me Baseboard or Makeblock Orion easily.
SizeChart
Mechanical Specification
| Size | 40.4*19.9*37.5mm |
| Weight | 58g |
| Gear type | 5 metal gear |
| Limit angle | 180°±5° |
| Bearing | DUAL BB |
| Horn gear spline | / |
| Horn type | Metal |
| Case | Engineering plastics(Polyamide) |
| Connector wire | FP: 240mm±5mm JR: 300mm±5mm |
| Motor | DC motor |
| Splash water resistance | No |
Electrical Specification
| Operating voltage | 4.8V |
| Idle current | 5mA |
| No load speed | 0.17sec/60° |
| Runnig current | 350mA |
| Peak stall torque | 9.0kg.cm |
| Stall current | 1500mA |
Control Specification
| Command signal | Pulse width modification |
| Amplifier type | Digital controller |
| Pulse width range | 500-2500usec |
| Neutral position | 1500usec |
| Running degree | 180°±3°(when 500～2500usec) |
| Dead bandwidth | 4 usec |
| Rotating direction | Counterclockwise (when 500～2500usec) |