mBot – PM2.5 Gas Sensor Firmware Installation Instructions

mBot – PM2.5 Gas Sensor Firmware Installation Instructions

 

Step 1: Download the firmware update toolkit;

http://mblockapp.oss-cn-hongkong.aliyuncs.com/HexDownloader.zip

 

Step 2:  Unzip the zip file to get the following directory;

• ino.standard.hex is the firmware for mBot with PM2.5 sensor libraries
• Hex files and software should be placed under the English directory.

Step 3: Run the HexDownloader program;

 

Step 4： download；

1. Click to load image (加载镜像HEX) and select the appropriate HEX file (mbot_firmware.ino.standard.hex);
2. Select UNO board type;
3. Select the serial port to which the corresponding device is connected;
4. Click “Download”;（”下载”）

 

 

There will be a prompt after download is completed;

After the firmware update is complete, you can use mBlock when connecting the mBot with PM2.5 sensor blocks;